Demo Day 2

Welcome back!

If you're tuning in today we're picking up where we left off yesterday and I'm back with another progress report on Day 2 of demo which I promise will be a lot less dramatic. Or not.

To refresh your memory - and mine - here's what the place looked like when we moved in:

And here's where we left off at the end of Day 1:

After waking up with a much better attitude, a renewed sense of determination, and a body that was surprisingly not as sore as I expected, we still had 1/2 of the hardy backer to demo and we also needed to remove all the hardy backer screws (all those little dots in the foreground of the above photo). Can you say #overkill?

Demoing the remaining hardy backer only took an hour or so and when we were finally finished, we started sweeping up the bits and pieces of thin set (leftover from the tiles) in preparation for our most tedious task yet...removing all.those.screws!

All 8 million of them:

We had a few options to remove them: use an angle grinder and shear off the screw head (I didn't like the sparks), use a crowbar and rip them out (I didn't like the splintering the wood doing this), or dig out the thin set in the screw head and drill them out.

We went with the latter. Mainly because I'm an OCD crazy person. So we spent the next few hours using our Dremel to clean out the screw head and used our Ryobi Drill to pull them out. 

One would Dremel and the other would drill and after a few hours, all the screws had been removed. It was by far the most absurd and time consuming method to remove the screws, but after the physically demanding work of demo Day 1, it was a welcomed change of pace. We turned on Pandora, worked in small sections, and got-er-done!

So much better! 

See that blue bucket above? We decided to use that bucket for all the screws we removed just to see how high we could fill up. Whoever laid the hardy backer went #buckwild with screws so we knew going in, there'd be a lot, but we were still shocked to see that nearly 3/4 of the bucket was filled by the end of the whole ordeal. #insaneinthemembrane

After removing all the screws, we used the shop vac to do a once over on the floors and took the vacuum hose to the perimeter. After vacuuming and putting our tools away, we could officially close the books on our 2nd day of demo. We finished Day 2 on a high note (and with a much better attitude) and guess what?! 

Dad was right. #dadforthewin

We did it. And we were proud of ourselves for doing it.

Not to mention the $1700 savings was a nice little incentive too.

Next week I'll be back to share the progress we've made on the house since the floor demo was completed and there will be a few more tutorials coming your way too! We're closing off a doorway, widening another, we finally chose a paint color, and we're one step closer to laying our floors. Things are happening so fast around here...follow along on Instagram so you don't miss a thing!